22 23
9. On/O
Switch on CROS device
The CROS device can be
congured to switch on
automatically when removed
from the charger. If this
function is not congured,
rmly press and hold the lower
part of the button for 3 seconds
until the indicator light blinks. Wait until the solid green
light indicates the CROS device is ready.
Switch o CROS device
When you switch on the CROS device you might hear
a start-up melody on the hearing aid side
Press and hold the lower part of button for 3 seconds
until the solid red light indicates the CROS device is
switching o.
Blinking green CROS device is switching on
Solid red for 2 seconds CROS device is switching o
Tap Control is available only for L90 and L70 rechargeable
models on the Lumity platform.
If they are part of the CROS system, the Tap Control
functions are available on the CROS device too and are
described in the hearing aid user guide.
To use Tap Control, tap the top of your ear twice.
10. Tap Control
To Next Page
Loading...
