Phonak Charger Ease - Charging the CROS System

26 27
For more information about pairing instructions for
Bluetooth wireless technology, specic to some of the
most popular phone manufacturers, go to:
https://www.phonak.com/en-int/support
3.
Your device shows a list of Bluetooth enabled devices.
Select the hearing aid from the list to pair the CROS
system with the device. A beep played through the
hearing aid conrms successful paring.
12.2 Connecting to the device
The connection will be maintained as long as the
device remains ON and within range.
Your CROS system can be connected to one device at
a time and paired to up to eight devices.
After your CROS system has been paired to your device,
itwill automatically connect again when switched on.
13. Phone calls
Your CROS system connects directly with Bluetooth
enabled phones. When paired and connected to your
phone, you will hear notications, incoming call
notication and the caller’s voice directly in your hearing
aid. Phone calls are “hands free”, this means that your
voice is picked up by the hearing aid microphones and
transmitted to the phone.
Your voice