Phonak ComPilot II User Guide

power
audio
14
4.2 Initial pairing to a phone
It is only necessary to perform the pairing
procedure once with each Bluetooth device, e.g. a
phone. ComPilot II will connect automatically to
the phone after the initial pairing.
J On your phone, ensure that Bluetooth is enabled
and search for Bluetooth devices in the connectivity
setting menu.
J Switch on ComPilot II.
J Press and hold the connect and volume up
buttons simultaneously (2 sec) until the audio
indicator starts to rapidly blink blue.

Phonak ComPilot II Specifications

General

Bluetooth	Yes
Power source	Rechargeable battery
Water Resistance	No
Compatibility	Phonak hearing aids with a wireless connection
Streaming	Yes, audio streaming from Bluetooth devices and FM receivers
Remote Control	Yes, via app or device buttons
Microphone	Built-in microphone for phone calls
FM compatibility	Yes, with optional FM receiver
Audio input	3.5mm audio jack
Neckloop	Integrated
Operating Range	Up to 10 meters
Bluetooth Version	Bluetooth 2.1 + EDR
Charging Time	3 hours