Phonak ComPilot II User Guide

1.
1.
2.
2.
8
3. Getting started
ComPilot II must be set up and charged before use.
3.1 Setting up the power supply
Select the adapter that corresponds to your country.
US EU
J First, insert the top round
end of the adapter into
the round corner of the power
supply.
J Click the bottom end of the
adapter in to lock it into place.
J To remove, rst pull back the tab
on the power supply.
J Pull the adapter upwards to
remove it.

Phonak ComPilot II Specifications

General

Bluetooth	Yes
Power source	Rechargeable battery
Water Resistance	No
Compatibility	Phonak hearing aids with a wireless connection
Streaming	Yes, audio streaming from Bluetooth devices and FM receivers
Remote Control	Yes, via app or device buttons
Microphone	Built-in microphone for phone calls
FM compatibility	Yes, with optional FM receiver
Audio input	3.5mm audio jack
Neckloop	Integrated
Operating Range	Up to 10 meters
Bluetooth Version	Bluetooth 2.1 + EDR
Charging Time	3 hours