Phonak ComPilot II User Guide

22
4.8 Additional features
The following features can be set either using the
Phonak RemoteControl App (see chapter 8.8) or by
your hearing care professional.
Your phone must support these features. Please
consult the phone user manual for details.
Caller’s name announcement
By default, ComPilot II will announce the caller’s name
as shown on the phone display (caller identication).
The following features can be enabled separately.
Press and hold the assigned button (2 sec) to use the
feature:
1. Last number redial: This will redial the last dialed
number.
2. Voice dial: Allows you to say the person’s name instead
of typing the number.
3. Dial preferred number: Directly dials a pre-dened
number.
4. Hold call: While in a phone conversation, this will put
the call on hold. The caller stays on the line but there

Phonak ComPilot II Specifications

General

Bluetooth	Yes
Power source	Rechargeable battery
Water Resistance	No
Compatibility	Phonak hearing aids with a wireless connection
Streaming	Yes, audio streaming from Bluetooth devices and FM receivers
Remote Control	Yes, via app or device buttons
Microphone	Built-in microphone for phone calls
FM compatibility	Yes, with optional FM receiver
Audio input	3.5mm audio jack
Neckloop	Integrated
Operating Range	Up to 10 meters
Bluetooth Version	Bluetooth 2.1 + EDR
Charging Time	3 hours