Phonak ComPilot II - Deleting Paired Bluetooth Devices

41
8.6 Deleting paired Bluetooth devices
If you encounter issues with one of the paired devices,
you may consider deleting the pairing to the ComPilot II.
Deleting the pairing of Bluetooth devices removes
the ability to connect to any previously paired
Bluetooth device.
1. Turn on your ComPilot II.
2. Press and hold the connect and volume up
buttons for 10 seconds until the blue rapid blinking
audio indicator stops.
3. Also delete the ComPilot II pairing entries on your
mobile phone before any re-pairing.
4. Repeat the pairing procedure as described in Chapter
4.2.