Phonak ComPilot II User Guide

33
ComPilot II can be used together with Roger or FM
receivers through its direct audio input (Europlug).
J Place the Roger / FM transmitter near
the sound source and turn it on.
J Attach your receiver to ComPilot II
via the Europlug socket as shown
in the picture (turn receiver on if
required).
When a signal is detected, you
will hear a beep notication
through your hearing aids.
J Press the main button to
accept the signal.
J Press the main button again
to stop or resume the signal.
7. Using ComPilot II with Roger / FM

Phonak ComPilot II Specifications

General

Bluetooth	Yes
Power source	Rechargeable battery
Water Resistance	No
Compatibility	Phonak hearing aids with a wireless connection
Streaming	Yes, audio streaming from Bluetooth devices and FM receivers
Remote Control	Yes, via app or device buttons
Microphone	Built-in microphone for phone calls
FM compatibility	Yes, with optional FM receiver
Audio input	3.5mm audio jack
Neckloop	Integrated
Operating Range	Up to 10 meters
Bluetooth Version	Bluetooth 2.1 + EDR
Charging Time	3 hours