Phonak ComPilot II - 6 Using Compilot II as a Remote Control; Changing the Volume

30
6. Using ComPilot II as a
remote control
Before this functionality can be used, your hearing
care professional must enable the remote control in
ComPilot II.
6.1 Changing the volume
Press buttons on ComPilot II:
J to increase the volume
J to decrease the volume
Adjusting the volume with ComPilot II will have
the same eect as adjusting the volume directly
on your hearing aids.
Reducing surrounding sounds
You can reduce the surrounding sounds with a single
button press. This may be helpful during music or phone
streaming. The level of reduction is set by your hearing
care professional.
J Press and hold the volume down button (>2 sec)
for more reduction.