47
ComPilot II is no longer recognized by the phone or other
Bluetooth device to which it was previously paired.
J 2 minutes after not nding a
device, ComPilot II will stop
seeking devices to save power.
J The devices are too far away
from each other.
J ComPilot II can be paired to a
maximum of 6 dierent
Bluetooth devices. If the
internal memory is full, new
pairings may overwrite
previous pairings.
J Pairing was deleted.
I am not streaming but the hearing aids keeps switching
between the Bluetooth and the normal hearing aid program.
J Your phone sends sounds to
ComPilot II due to incoming
SMS or e-mails.
J Phone key tones are switched
on.
I hear my phone’s key-press tones in my hearing aids.
J The key-press tones may be
enabled on your phone.
Causes
J Switch ComPilot II o.
Wait until the red indicator
switches o, then turn
device on again.
J Bring devices within a meter
of each other and try again.
J Repeat the pairing between
ComPilot II and the
Bluetooth device which
was over-written.
J Repeat the pairing between
ComPilot II and the Bluetooth
device which was deleted.
J Disable the system sounds for
reminders, alarms, SMS, etc.
via your phone menu.
J Switch o phone key tones via
your phone menu.
J Deactivate key-press and
conrmation tones on your
phone. Please refer to the
phone’s user guide.
What to do
To Next Page
Loading...
Need help?
General
