Phonak ComPilot II User Guide

49
Causes
J ComPilot II is not paired to
the phone.
J The distance is too great
between ComPilot II and the
phone.
The phone is ringing, the Audio indicator is solid blue but
there is no ringing signal through the hearing aids.
J ComPilot II is out of range of
the hearing aids.
J Phone is set to vibrate.
J You are already on a
phone call and a second
call cannot be recognized.
2. Restart ComPilot II by
switching it o and then on.
The ComPilot II Bluetooth
functionality will be
automatically reactivated.
3. Activate ComPilot II by
selecting it in the phone’s
“Active device” menu.
4. Reduce the distance between
ComPilot II and the phone.
J Follow the pairing process in
this guide.
J Wear ComPilot II around your
neck. Keep distance to phone
<10 m (<30 ft).
J Wear ComPilot II correctly
around your neck with both
neckloop plugs rmly plugged
in.
J Enable ring tone on phone.
J Hang up the rst phone call,
then accept the second call.
What to do

Phonak ComPilot II Specifications

General

Bluetooth	Yes
Power source	Rechargeable battery
Water Resistance	No
Compatibility	Phonak hearing aids with a wireless connection
Streaming	Yes, audio streaming from Bluetooth devices and FM receivers
Remote Control	Yes, via app or device buttons
Microphone	Built-in microphone for phone calls
FM compatibility	Yes, with optional FM receiver
Audio input	3.5mm audio jack
Neckloop	Integrated
Operating Range	Up to 10 meters
Bluetooth Version	Bluetooth 2.1 + EDR
Charging Time	3 hours