PHOTONIS TacFusion - 3.4.4 Cursor Usage and Configuration

User Manual A1 TacFusion
18
 Image Brightness
Steps:
1. Hold the button to show the menu of TacFusion.
2. Press the button and button to move the cursor to Settings submenu.
3. Press the button to confirm.
4. Press the button and button to move the cursor to Image Brightness submenu.
5. Press the button to confirm.
6. Press the button and button to set the brightness value.
The higher, the brighter.
 Image Contrast
Steps:
1. Hold the button to show the menu of TacFusion.
2. Press the button and button to move the cursor to Settings submenu.
3. Press the button to confirm.
4. Press the button and button to move the cursor to Image Contrast submenu.
5. Press the button to confirm.
6. Press the button and button to set the contrast value.
The higher, the more contrast.
3.4.4 Cursor
Purpose:
Display the cursor on the live view to have better indication of the target.
Steps:
1. Hold the button to show the menu bar of TacFusion.
2. Press the button and button to move the cursor to Cursor submenu.
3. Press the button to confirm.
4. Manually move the TacFusion, align the horizontal line with the target bottom and measure the distance to the target.
5. Hold the button to exit.
Note:
To disable the cursor, go to Cursor submenu and press the button.