H-845 Hexapod System MS222E Version: 2.1.1 9
Collisions can damage the hexapod, the load to be moved, and the surroundings.
Make sure that no collisions between the hexapod, the load to be moved, and
the surroundings are possible in the workspace of the hexapod.
Do not place any objects in areas where they can get caught by moving parts.
Immediately stop the motion if a malfunction occurs in the hexapod controller
(see user manual of the hexapod controller).
2.2.5 Safety Measures during Maintenance
The hexapod can become misaligned as a result of improper maintenance. The
specifications (p. 59) can change as a result.
Only loosen screws according to the instructions in this manual.
To Next Page