Precautions
1.when password authentication input
password "33",the display the original
password;
2.when instrument work under the
three-phase three-wire mode , active
power, reactive power and power factor are
only the sum of the value, and there is no
concept of a single-phase, single-phase
value is 0;
3.For the instrument which do not
support the relay output function, will not
have the relevant settings menu;
4.When the data setting is invalid, the
set is unsuccessful, restore the original
parameters;
5. For other customization features, in this
description does not describe!
12
To Next Page
Loading...
