PNOZ s9
Operating Manual PNOZ s9
21401-EN-10
29
Remove plug-in terminals
Procedure: Insert the screwdriver into the housing recess behind the terminal and lever the
terminal out.
Do not remove the terminals by pulling the cables!
Order reference
Product type Features Connection type Order No.
PNOZ s9 24 VDC Screw terminals 750 109
PNOZ s9 C 24 VDC Spring-loaded terminals 751 109
PNOZ s9 C
(coated version)
24 VDC Spring-loaded terminals 751 189
PNOZ s9 C 24 VDC; 10 pieces Spring-loaded terminals 751 909
EC declaration of conformity
This product/these products meet the requirements of the directive 2006/42/EC for ma-
chinery of the European Parliament and of the Council. The complete EC Declaration of
Conformity is available on the Internet at www.pilz.com/downloads.
Representative: Norbert Fröhlich, Pilz GmbH & Co. KG, Felix-Wankel-Str. 2, 73760 Ost-
fildern, Germany
To Next Page
Loading...
