Pilz PSENvip RL D P Set - Page 76

Commissioning
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 76
Tool class 1
} The contour of these tools is fully detected by the PSENvip.
} The front (V1 or B1) and rear (H1 or B1) bending lines are within the protected field.
} The front segments of the protected field are at least 15 mm away from the front bending
line.
} These tools are safeguarded in compliance with the standards.
} Example:
max. 32 mm
max. 25 mm
> 15 mm
> 15 mm
H HV V
Fig.: Example for tool class 1