9
WPS setup
WPS encrypted networks are identified by ‘[WPS]’ at the start of the Network
name, and have two methods of connection. Select one and follow the prompts.
When using the network wizard an additional option to Skip WPS is available.
Select one and follow the prompts:
• Push Button >
Supersound 101 prompts you to press the connect button on the router. Then
press the SELECT control.
• Pin > (code number)
Supersound 101 generates an 8-digit code number which you enter into the
wireless router, access point.
• Skip WPS >
Enter key as for a standard encrypted network, above. For more information on
setting up a WPS encrypted network, see your WPS router’s instructions.
On completion
Supersound 101 connects to the selected network.
If connecting fails, Supersound 101 returns to a previous screen to try again. To
exit the process, press BACK.
To Next Page
Loading...
