PinGo System - Configuring Watch Settings; Adjusting Volume Settings; Adjusting Screen Brightness; Configuring Sleep Mode

Page 17 Page 18
3. Tap on Bluetooth.
4. Turn Bluetooth on.
5. Tap the name of the device when it appears.
If you don’t want to connect your PinGo Watch to any Bluetooth device, you
can turn the Bluetooth off.
Use PinGo Watch with a cellular network
1. Open the Sengs app on your PinGo Watch.
2. Scroll down and tap on the More opon.
3. Tap on Mobile networks.
4. Tap on VoLTE and turn it on for a faster connecon.
5. If you want to verify the APN of your carrier, tap APN to verify the correct
sengs of your network carrier.
6. Tap Data roaming and put a check mark on the square to enable connecon
even when traveling in your coverage area.
NOTE: Your PinGo Watch is pre-configured to use the best network connecon
available. Your PinGo Watch may restart when changing these sengs.
With PinGo Watch with cellular connecon, you can make and receive calls,
send your locaon, and more.
NOTE: Cellular service is not available in all areas or with all carriers.
If your PinGo Watch didn’t come with a pre-intsalled SIM card, turn your PinGo
Watch off and insert an acve SIM card in the slot, then turn your PinGo Watch
on.
To verify the right cellular network sengs:
To check the cellular signal strength, press the power buon to acvate the
screen, touch and hold the top of the screen, then swipe down to show the
network connecon and its signal strength.
Set up date and me
1. Open the Sengs app on your PinGo Watch.
2. Scroll down and tap on the More opon.
3. Tap on Date & me.
4. Tap on Automac date & me to put or remove a check mark.
5. Tap on Automac me zone to put or remove a check mark.
6. Tap on Use 24-hour form to put or remove a check mark.
Your PinGo Watch comes pre-configured with the automac date, me and
me zone based on your locaon and network provided me.
To change it or set it up manually:
Change language on PinGo Watch
1. Open the Sengs app on your PinGo Watch.
2. Scroll down and tap on the More opon.
3. Tap on Language.
4. Tap on the desired language.
To change the language of your PinGo Watch:
Tip: Turning the Bluetooth off will have a posive impact on baery duraon.