Pioneer PDP-4340HD

13Useful Features
English
103
En
8
7
1
4
3
2
6
5
VCR control buttons
When the VCR is preset by the learning function of the
remote control, the remote control unit buttons will
function as follows when the Mode switch of the
remote control unit is set to VCR.
• When the input selector button having the same
number as the input terminal connecting the VCR is
pressed, the VCR can be operated using 1 to 8.
• VCR made by other manufacturers and not preset
can also be operated using the remote control unit if
1 to 8 have learned the functions. See page 97.
1 CH +/–
Press to select the channel of the TV tuner on the
VCR.
2 I (PLAY)
Selects playback.
3 S (REW)
Rewinds the tape and allows picture search.
4 SOURCE a
Turns the power of the VCR on and off.
5 F (PAUSE/STILL)
Sets pauses and still pictures.
6 V (FF)
Rapidly advances the tape and allows picture
search.
7 E (REC)
Starts recording.
8 H (STOP)
Stop tape transport.
• The color-highlighted buttons on the remote control
can learn the control signal from another device’s
remote control.
Mode switch
(with “VCR”
selected)
PDP5040HD-Eng (97-105) 7/24/03, 2:01 PM103