12Useful Adjustment Settings
English
95
En
Programming a password
(AV mode only)
You can program a password to prevent other persons
from changing especially Parental Control settings.
Setting and changing the password
Use the following procedure to newly set or change the
password:
1
Press HOME MENU.
2
Press / to select “Setup”, and then press
ENTER.
3
Press / to select “Password”, and then press
ENTER.
• If you have set a password, the password entry
screen appears. Enter your 4-digit password
using buttons 0 – 9.
• The factory default is “1234”.
4
Press / to select “Change Password”, and then
press ENTER.
5
Enter a 4-digit password to be newly set, using
buttons 0 – 9.
6
Enter the same password that you have entered in
step 4, using buttons 0 – 9.
7
Press HOME MENU to exit the menu.
•Take a note of the newly set password and keep it
handy.
PDP5040HD-Eng (81-96) 7/24/03, 2:01 PM95
To Next Page
Loading...
