12 Useful Adjustment Settings
96
En
Cut along the dotted line and file after reading and filling out.
We suggested you write down your password so you don’t forget it.
PDP-5040HD/PDP-4340HD
Your password No.:
If you forget the password
When the message “Please Input Your Password” is
displayed in step 3 above, press the ENTER button on the
remote control unit and hold it down for 3 seconds or
longer.
The password reverts to “1234”.
Resetting the password
1
Press HOME MENU.
2
Press / to select “Setup”, and then press
ENTER.
3
Press / to select “Password”, and then press
ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4
Press / to select “Reset”, and then press
ENTER.
5
Press / to select “Yes”, and then press ENTER.
6
Press HOME MENU to exit the menu.
• The above procedure will reset the password to the
factory default (1234).
PDP5040HD-Eng (81-96) 7/24/03, 2:01 PM96
To Next Page
Loading...
