09 Basic Adjustment Settings
44
En
Setting up digital TV channels
This section describes how to search and set up
digital TV channels that you can watch under the
current conditions. Unless you set up digital TV
channels using Auto Channel Preset, you cannot
tune in those channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and
sets up digital TV channels.
1
Press HOME MENU.
2
Press / to select “DTV Setup”, and then
press ENTER.
3
Press / to select “DTV Channel Setup”,
and then press ENTER.
4
Press / to select “Auto Channel Preset”,
and then press ENTER.
5
Press / to select “Air” or “Cable”.
6
Press / to select “Start”, and then press
ENTER.
• Channel search automatically starts.
7
Press HOME MENU to exit the menu.
•With “Cable” selected, this system can receive only
digital TV signals with the 8VSB modulation. This
system does not support the QAM modulation.
PDP5040HD-Eng (40-55) 7/24/03, 1:59 PM44
To Next Page
Loading...
