06 Part Names
16
En
Remote control unit
With the mode switch set to TV
1 TV a: Turns on the power to the Plasma
Display or places it into standby mode.
2 Transmission confirmation LED
3 INPUT: Selects an input source of the
Plasma Display. (DTV, i.LINK, INPUT 1, IN-
PUT 2, INPUT 3, INPUT 4, PC)
4 •(dot): Enters a dot.
5 CH RETURN: Returns to the previous chan-
nel.
Mode switch (with
“TV” selected)
6 CH +/–: Selects the channel.
7 RETURN: Returns to the previous menu
screen.
8
/ / / : Selects a desired item on the menu
screen.
9 DTV INFO: Shows more information on DTV
programs.
0 SPLIT: Switches the screen mode among 2-
screen, picture-in-picture, and single-screen.
- FREEZE: Freezes a frame from a moving
image. Press again to cancel the function.
= SLEEP: Sets the sleep timer.
~
: When pressed, all buttons on the remote
control unit will light. The lighting will
turn off if no operations are performed
within about 5 seconds. This button is
used for performing operations in dark
places.
! ANT: Selects the antenna (A, B). See pages
24 to 26 for details.
@ 0 – 9: Sets the channel.
# CH ENTER: Executes a channel number.
$ VOL
+/–: Sets the volume.
% e MUTING: Mutes the sound.
^ HOME MENU: Displays the menu screen.
& ENTER: Executes a command.
* DTV GUIDE: Displays the DTV Electronic
Program Guide (EPG).
( FAVORITE CH (A, B, C, D):
Selects any of the four preset channels. See
page 43 for details to set the FAVORITE CH.
While watching, you can toggle the set chan-
nels by pressing A, B, C and D.
) SCREEN SIZE: Selects the screen size.
_ DISPLAY: Displays the channel information.
+ MTS: Selects the MTS/SAP.
¡ AV SELECTION: Selects audio and video
settings. (AV mode: STANDARD, DYNAMIC,
MOVIE, GAME, USER. PC mode: STANDARD,
USER.)
• When using the remote control unit, point it at the
Plasma Display.
• See pages 97 to 105 for operating buttons not listed
on this page.
@
#
$
%
^
&
*
(
)
_
+
¡
!
~
12
3
5
6
7
4
8
9
0
-
=
PDP5040HD-Eng (13-16) 7/24/03, 1:58 PM16
To Next Page
Loading...
