PDP-502MX, PDP-502MXE
98
General
Light emission panel ............ 50 inch plasma display panel
Number of pixels.............................................. 1280 x 768
Power supply ............................ AC 100 – 240 V, 50/60 Hz
Rated current ....................................................5.4 – 2.2 A
Standby power consumption ................................... 0.6 W
External dimensions........ 1218 (W) x 714 (H) x 98 (D) mm
(when using display stand)
...................................... 1218 (W) x 737 (H) x 300 (D) mm
Weight.................................................................... 40.3 kg
(including display stand) ........................................ 41.0 kg
Operating temperature range ............................ 0 to 40 °C
Operating atmospheric pressure range
........................................ 0.8 to 1.1 atmospheric pressure
Input/output
Video
INPUT 3
Input BNC jack (x5)
RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity/
75 Ω or 2.2 kΩ
(impedance switch)
G ON SYNC ...
1 Vp-p/75 Ω/negative sync.
INPUT 4
Input Mini D-sub 15 pin (socket connector)
RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity
/2.2 kΩ
G ON SYNC
... 1 Vp-p/75 Ω/negative sync.
*Compatible with Microsoft’s Plug & Play
(VESA DDC1/2B)
Output Mini D-sub 15 pin (socket connector)
75 Ω/with buffer
Audio
Input AUDIO INPUT (for INPUT3)
Pin jack (x2)
L/R ... 500mVrms/more than 10 kΩ
AUDIO INPUT (for INPUT4)
Stereo mini jack
L/R ... 500mVrms/more than 10 kΩ
Output AUDIO OUTPUT
Stereo mini jack
L/R ... 500mVrms (max)/less than 5 kΩ
SPEAKER
L/R ... 8 – 16 Ω/2W +2W (at 8 Ω)
Control
CONTROL IN/OUT ... monaural mini jack (x2)
Accessories
Remote control unit ......................................................... 1
Remote control unit case ................................................. 1
AA (R6/UM-3) batteries.................................................... 2
Cleaning cloth................................................................... 1
Speed clamp .................................................................... 2
Bead band ........................................................................ 2
Operating Instructions...................................................... 1
Display stand.................................................................... 2
Washer (large) .................................................................. 2
Washer (small) ................................................................. 2
Hex hole bolt (M8X40) ..................................................... 2
÷ Due to improvements, specifications and design are subject to
change without notice.
Accessories
STANDBY
/ON
SCREEN
VIDEO
RGB 1 RGB 2
MENU
SET
CU-V154
Y/C
VOL
MUTE
DISP
Î
SIZE
Remote Control Unit
(CU-V159)
(AXD1446)
AA (R6) Batteries ×2
Display Stand ×2
(AMR3168)
Remote Control
Unit Case
(AMR3169)
For PDP-502MXE/YVLDK
Speed
Clamp
Bead
Band
Binder Assy (AEC1758)
Hex Hole Bolt ×2
(SMZ80H400FZB)
Washer (small) ×2
(WB80FZB)
Washer (large) ×2
(WAX1F200K320)
Cleaning Cloth
(AED1174)
Power Cord
(ADG1178)
Pin/BNC Conversion
Adaptor
(AKX1052)
(L= 2 m)
PDP-502MX/LUCBW Only
To Previous Page
Loading...
Need help?
General