K
Kurt CohenAug 28, 2025
Why is the cross fader not working on my Pioneer Mixer?
- AAlec PhamAug 29, 2025
If the cross fader on your Pioneer Mixer isn’t working, ensure the CROSS FADER ASSIGN switch is correctly set for the desired channel.
To Next PageTo Next PageWhy is the cross fader not working on my Pioneer Mixer?
If the cross fader on your Pioneer Mixer isn’t working, ensure the CROSS FADER ASSIGN switch is correctly set for the desired channel.
Why are the effects not working on my Pioneer Mixer?
If the effects on your Pioneer Mixer aren’t working, ensure the effect channel selector (CH SELECT) is correctly set to the channel on which you want to apply effects. Also, adjust the effect parameter 2 dial (LEVEL/DEPTH), as it may be set to [MIN].
How to fix no digital output on Pioneer Mixer?
If there is no digital output from your Pioneer Mixer, set the rear panel sampling frequency selector to match the specifications of the connected component, as the digital output sampling frequency (fs) may not match the specifications of the connected component.
Why MIDI sequencer can’t be synchronized with Pioneer Mixer?
If the MIDI sequencer can’t be synchronized with your Pioneer Mixer, set the MIDI sequencer’s sync mode to “slave”. If that doesn't work, note that MIDI sequencers that do not support MIDI timing clock cannot be synchronized.
Why is the measured BPM value different from the published value on Pioneer Mixer?
Some differences may occur due to differences in BPM detection methods, so no remedy is necessary.
How to fix character input issue on Pioneer Mixer keyboard?
If the character pressed on the keyboard is not entered on your Pioneer Mixer, set the keyboard language setup to match the type of keyboard connected to the USB connector, as the keyboard connected to the USB connector may not match the setting selected during this unit’s keyboard language setup.
What to do if touch panel is not responding on Pioneer Mixer?
If there is no response when the touch panel is touched on your Pioneer Mixer, set calibration properly in hardware setup’s touch panel setting, as the touch panel’s calibration may be incorrect.
What to do if there is no video image on my Pioneer Mixer?
If there is no video image or the image is disrupted on your Pioneer Mixer, make sure the VIDEO INPUT switch is set to the currently playing component and that all connection cables are properly connected and free of dirt. Adjust trim controls properly. Ensure the input video source and TV monitor's video signal format match the system settings selected during hardware setup, and that the TV monitor’s input selector is set to the correct input type.
Why BPM can’t be measured on Pioneer Mixer?
If the BPM can’t be measured or the measured BPM value is incorrect on your Pioneer Mixer, adjust the AUDIO TRIM dial so that the input level approaches 0 dB on the channel level indicator, as the input level may be too high or too low. If the BPM still isn't correct, strike the TAP button to set BPM manually, as BPM may not be correctly measurable with some tracks.
How to fix cross fader on Pioneer Mixer?
If the cross fader isn’t working on your Pioneer Mixer, correctly set the CROSS FADER ASSIGN switch for the desired channel. The switch setting ([A], [THRU], [B]) may be incorrect.
General| Brand | Pioneer |
|---|---|
| Model | SVM-1000 |
| Category | Music Mixer |
| Language | English |
