What to do if there are no power lights on my Pit Boss Grill?
If there are no power lights on the control board of your Pit Boss Grill, first ensure the unit is properly plugged into a working power source or try reseating the battery. If the issue persists, it may be due to a faulty control board, and you should contact Customer Care for a replacement part.
How to fix "ErH" error code on Pit Boss PB150PPB Grill?
If your Pit Boss Grill displays an "ErH" error code, it means the unit has overheated, possibly due to a grease fire or excess fuel. To resolve this, turn the Temperature Control Dial to the OFF position to shut down the unit and allow the grill to cool completely.
How to prevent flare-ups on Pit Boss PB150PPB?
If you are experiencing frequent flare-ups with your Pit Boss Grill, try cooking at a lower temperature. High cooking temperatures can often lead to flare-ups.
What does "Err" (Auger) mean on Pit Boss Grill?
If your Pit Boss Grill displays an "Err" error code with the Auger icon, it indicates a loose wire connection between the auger and the control board. To fix this, open the Access Panel, follow the Electrical Wire Diagram to disconnect the Auger wire from the control board, and then reconnect it securely.
How to fix "Err" (Igniter) error on Pit Boss PB150PPB Grill?
If your Pit Boss Grill shows an "Err" error code with the Igniter icon, it means the igniter wire has a loose connection. To resolve this, open the Access Panel and follow the Electrical Wire Diagram to disconnect the Igniter wire from the control board, then reconnect it.
What does "Err" (Fan) error mean on Pit Boss PB150PPB?
If your Pit Boss Grill displays an "Err" error code with the Fan icon, it indicates a loose connection in the fan wire. To correct this, open the Access Panel, use the Electrical Wire Diagram to locate and disconnect the Fan wire from the control board, and then reconnect it securely.
What does "noP" mean on Pit Boss Grill?
If your Pit Boss Grill displays a "noP" error code, it means the meat probe is either not connected or has a bad connection at the meat probe connection port. Try disconnecting the meat probe from the connection port on the Control Board and reconnecting it to ensure a secure connection.
How to fix "Er1" error code on Pit Boss PB150PPB?
If your Pit Boss Grill displays an "Er1" error code, the grill probe wire is not making a proper connection. Disconnect and then reconnect the Grill Probe connectors to the Control Board to ensure a secure connection.
What to do if Pit Boss PB150PPB Grill battery pack has no power?
If there are no power lights or one red light on the battery pack of your Pit Boss Grill, remove the battery from the unit and connect the Battery Charger to the battery to recharge it.
What does "ErP" error mean on Pit Boss PB150PPB?
If your Pit Boss Grill shows an "ErP" error code, it indicates that the unit was not turned off properly the last time it was connected to power. To resolve this, turn the Temperature Control Dial to the OFF position to properly turn the unit off.
Grill tested and listed to UL and ULC standards for pellet fuel burning appliances.
California warning regarding chemical exposure from wood dust and carbon monoxide.
Key safety rules for installation and operation, including clearances and prohibited locations.
Instructions for safely disposing of ashes from the grill in a metal container.
Information on approved fuel type, storage, and characteristics of hardwood pellets.
Explanation of creosote formation and the need for its removal to prevent fires.
Guidelines to prevent carbon monoxide poisoning, symptoms, and risk factors.
Details on compliance with FCC rules for radio frequency interference.
Detailed description of each main component and its function.
Explanation of the control board functions, buttons, and displays.
Description of battery pack, charger, level indicator, and charging instructions.
Step-by-step guide to prime the auger system before first use or after running out of pellets.
Cleaning instructions for the burn pot, grates, main plate, and interior barrel.
Cleaning instructions for exterior surfaces, grease cup, and meat/grill probes.
Cleaning procedures for the hopper and air intake vent for optimal airflow.
A quick reference table for cleaning frequency and methods for various grill parts.
Troubleshooting power, battery lights, and control board issues.
Guides for resolving 'ErH', 'Er1', 'Er2', 'ErP', and 'noP' error codes.
Troubleshooting stable temperature, excessive smoke, and flare-ups.
Troubleshooting error codes related to auger, igniter, fan, and pellet supply.
Details of the 5-year parts and 1-year battery warranty, including exclusions.
To Next Page
General