Pixel EM-181 - Revision History; Table 1 - Revision History

Advanced Programming Guide
EM-181
Copyright © 2023 Pixel Technologies Pty. Ltd
3
Revision History
The latest revision of the product manual can be obtained through the Pixel Technologies website
located at www.pixeltechnologies.com.au
The following is a list of changes made to this document:
Revision
Description of Changes
1.0.1929.0
Initial Release
1.0.1938.2
Added hotline function
1.0.1942.4
Added factory default reset feature
1.0.2008.6
Added SP Mode feature
1.0.2011.8
Changed default setting for Output 2 Option to ‘1’ (Line On)
1.0.2015.10
Added alarm button debounce readback example
1.0.2035.12
Added Breakdown trigger and FSAL modes
1.0.2039.14
Updated Station Input information as well as amended FSAL operation
1.0.2042.16
Amended wording around FSAL mode and the MR operation
1.0.2133.18
New features added to firmware versions x.x.2128.0
• Forced Alarm Reset
• Alarm Filter Time
• Scream Detection
• Report Fail Alternating LED Indicator
• System Setup via SD card (For EM-181Mu ONLY)
1.0.2136.20
Fixed verification command for RPMS Alternating LED Behaviour
1.0.2142.22
Added Extended Station Addressing (8 additional stations)
1.0.2147.24
Added Alarm Log LED Indicator (Enable/Disable)
Added Alarm Log RPMS Sync (Enable/Disable)
1.0.2247.26
Multiple EM-181 across a single phone line available via separate document
1.0.2320.28
Include Firmware Update via an SD Card and 181/SK Voice Recording feature
1.0.2326.30
Removed AUX-C station reference this is now reserved for Pixel Fire Evac System
1.0.2440.32
Added new section: Automatic Self-Shutdown
New features added to firmware version x.x.2427.4:
• Outputs 1 & 2 trigger for PSW-60W and UPS-12V faults.
• AUX-C station reinstated on SL/SK firmware.
Table 1 - Revision History