PLANET ECLIPSE MG 100 - Attaching a Generic Loader

FIG-1
Push the loader
A
into the PAL feedneck assembly
B
as normal.
FIG-2
If the loader doesn’t t correctly use the clamping feedneck lever
E
to
loosen / tighten accordingly.
NOTICE!
Although the PAL plunger will still activate when red, NO gas is wasted nor is
the eciency of the MG 100 aected in any way.
The PAL system WILL NOT improve the performance of non-PAL gravity-fed
loaders nor will it aect the performance of any force-fed loaders.
WARNING
FIG-1
FIG-2
A
E
B
19
MG 100
QUICK START
ATTACHING A
GENERIC LOADER