User’s Manual of PL-510W
27
(temporary key integrity protocol) or TKIP &AES.
Security Key: Enter a security key, which must be between 8-63
ASCII characters long or 64 HEX characters long.
Key Renewal Interval: Specify a valid time interval for the key to be
updated. Do not change the default value unless necessary.
5.3 Wireless Access Control
The MAC-based Wireless Access Control feature can be used to allow or disallow
clients to connect to your wireless network.
Wireless Access
Control
To deactivate the Wireless Access Control feature, select “Disable”
means; to only allow wireless clients included in list to connect to your
wireless network, select "Allow"; to only block wireless clients included
in list to connect to your wireless network, select "Deny".
MAC Address Enter the MAC address of a wireless client.
Add Click to add a new MAC to the list.
MAC Address
List
Displays added MAC address entries. You can add new entries or
delete existing entries according to your needs.
To Next Page
Loading...
Need help?
General
