User’s Manual of PL-510W
36
Chapter 7: PLC
Tools
7.1 Firmware Update
Firmware upgrade is released periodically to improve the functionality of your Device
and also to add new features.
1. Click "Browse" to locate and select the firmware.
2. Click "Update" to upgrade your firmware. Do not disconnect Device from the
management PC (the PC you use to configure the Device) or power supply while
upgrade is in process; otherwise, Device may be permanently damaged. Device will
restart automatically when upgrade completes.
7.2 Backup & Restore Settings
This section allows you to backup current settings or to restore the previous settings
configured on the Device.
To Next Page
Loading...
Need help?
General
