High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 19 -
2 Initial Connection and Login
The package should contain the following items plus the VIP-1010PT. If any item is
missing or damaged, please contact the seller immediately.
Quick Installation Guide Handset Handset Cord RJ-45 Cable Stand
Step 1. Handset Connection
Plug one end of the handset cord into the handset and the other end into the
handset jack
Step 2. Connecting Power System
The VIP-1010PT can be powered either by its external AC/DC adapter or by
connecting to an IEEE 802.3af/at PSE device such as 802.3af injector / hub or
802.3af/at POE switch. Once the VIP-1010PT is powered, the LCD screen will
prompt for POST.
Note 1: This unit does not include the 5V/1.2A power adapter.
Note 2: Only WAN supports POE.
To Next Page
Loading...
Need help?
General
