High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 33 -
4 LCD Advanced Settings
4.1 Basic Settings
4.1.1 Language
You can change the language through the method below:
Press Menu -> Settings -> Basic Setting -> Language
4.1.2 Date & Time
1. The IP phone displays Time and Date in Idle status. You can set the Time and
Date obtained from SNTP server automatically or you can set the time and
date manually.
2. Set SNTP via phone interface: Access Menu -> Settings -> Basic Setting ->
Date & Time -> SNTP Setting.
3. To set the date & time format via the phone interface, access Menu ->
Settings -> Basic Setting -> Date & Time -> Format Setting:
z Access the Time Format in Format Setting interface and then press the Left
or Right key on the phone keyboard, or the Switch soft key to select the time
format (12 Hours or 24 Hours).
z In the Date &Time Format interface, press the Up or Down key on the phone
keyboard to access the Date Format. Press the Left or Right key on the
phone keyboard or the Switch soft key to select the date format to process
setting.
z The phone supports four Date formats. The selected date format will appear
in the Idle. For example, if the time was “2013-09-13”, the date formats in
the menu and the corresponding formats displayed in the Idle would be as
follows:
To Next Page
Loading...
Need help?
General
