High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 40 -
5 Web Configuration
5.1 Ways to configure
The VIP-1010PT has two different ways for different users.
z Use phone keypad.
z Use web browser (recommended way).
5.2 Setting via web browser
When this phone and PC are connected to network, enter the IP address of the WAN
port in this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or
http://xxx.xxx.xxx.xxx:xxxx/).
If user does not know the IP address, he can look it up on the phone’s display by
pressing the Status button.
The login page is shown below: A
z Default user with root level:
User Name: admin
Password: 123
The default password of phone screen menu is 123.
After user configures the IP phone, he needs to click the Save button in the
configuration under Maintenance on the left side of the screen to save user
configuration. Otherwise, the phone will lose user modification after power is off and
on.
To Next Page
Loading...
