High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 24 -
2. Enter the Trans number interface, and then input the number you will transfer to;
3. Press the FWD key or the Trans soft key to transfer the call to the number you
want to transfer to;
4. Return to the Idle automatically ;
Note: The UI will display Hold status interface when the number you want to transfer
to does not exist.
3.8.2 Consultation Transfer
1. Press the Trans soft key to enter the number you want to transfer to during the
talking. Input the number you want to transfer to.
2. Press the O
K key on the phone keyboard or the Dial key to make a call
.
3. Press the T
rans soft key to finish transfer after the other person involved answers
the incoming call and with consultation
. You can finish transfer via putting down the
handset
or press the Cancel soft key to cancel transfer if you currently use handset
to make or answer a call.
3.9 Three-way conference call
User can use the Local conference feature to hold a 3-way conference by pressing
the Conference soft key to invite the current talking line and the line on hold to
attend the conference. The Local conference feature of IP phone VIP-1010PT can
invite two parties at most to attend conference. The conference type of IP phone
VIP-1010PT is Local conference with default.
1. Create talking with first party.
2. Press the New soft key to create a new talking.
3. Press the Back soft key of dial interface to hold talking with first party.
4. Input the number of the second party and press the OK key on the phone
keyboard or the Dial key or the Send soft key to make a call. When the
To Next Page
Loading...
Need help?
General
