message is designed to replace the SNMPv1 trap message.
SNMP community
An SNMP community is the group that devices and management stations running SNMP belong to. It
helps define where information is sent. The community name is used to identify the group. A SNMP
device or agent may belong to more than one SNMP community. It will not respond to requests from
management stations that do not belong to one of its communities. SNMP default communities are:
。 Write = private
。 Read = public
4.2.2.2 SNMP Configuration
To configure SNMP management, click on System/SNMP menu button, and the web main page changes
to the SNMP Management function, as shows in the following:
The followings are the description of the sub-table.
1. SNMP Agent Status Configuration
This block enables to turn on SNMP Agent.
Enabled / Disabled: To turn on or turn off the SNMP function on the Switch.
2. System Options
To Next Page
Loading...
Need help?
General