5.3 Select on the VLAN chich you want to tag with in the VLAN Table field and click on the “Add” button
to add. This will add the VLAN in to the VLAN with The Trunk Port field.
5.4 Click on the “close” button to close the VLAN port configuration table of port #2, and back to the
802.1Q main page.
5.5 Click on the “Show VLAN Members” button to show the VLAN members.
5.6 As shows in the following screen:
4.7.2 MAC Address Bind
This function is based upon for the switch security. When you add one MAC Address is bind with one port.
It remains in the switch's address table, regardless of whether the device is physically connected to the
switch. This saves the switch from having to re-learn a device's MAC address after it has been
To Next Page
Loading...
Need help?
General