34
Mini100/Mini2
33
Mini100/Mini2
● 4-2-a Adding NetBEUI Protocol
1. From My Computer, select and double-click Control Panel and then
Network icons. The following screen will be displayed.
2.Click on the “Protocol” tab, and then click on the Add button. If
NetBEUI has not bee installed, select “NetBEUI protocol” and click on
the OK button.
3. The system will ask you whether you wish to restart the computer.
Choose “Yes” to restart the system.
● 4-2-b Adding IPX/SPX Protocol
1. From My Computer, select and double-click Control Panel and then
Network icons.
To Next Page
Loading...