Planex Mini100 - Chapter6 Deleting The Supplied Utilities

154
● Windows95/98/NT
1. From the Start button, select Settings and then Control Panel.
2. Double-click the Add/ Remove Application icon.
3. Select an item labeled “PLANEX Print Server for Windows ****”, and
click on the Add/ Remove button. (Either “95/98” or “NT” will be
displayed in “****” above.
153
Mini100/Mini2
Note :
Some printers with bi-directional print support may not function properly
when used with the print server. If this is the case, please refer to the user’s
manual of your printer to disable the bi-directional print function. Our Web
site (http://www.planex.co.jp) lists all the supported printers.
Follow the steps below to delete the PS Port and Smart Print Manager 2
utilities.
Chapter 6
Deleting the Supplied Utilities