Mini100/Mini2
About this Manual
Chapter 1
Introduction
Describes the Mini300 Print Server and its exterior features. Please be sure to read the
Overview above and this chapter before installing the product.
Chapter 2
Hardware Installation
Helps you to get started with the basic installation of the print server.
This chapter also explains how to attach the print server to a printer and a network.
Chapter 3
Software Installation
Describes how to install the supplied utilities “Smart Print Manager” and “LPR for
Windows”.
Chapter 4
Setting Up a Network
Explains how to add networking protocols to enable the print server on a network.
Installation Overview
Provides a brief summary of installation procedure for each OS or networking protocol.
Version:1.0 E Rev.A
Appendix
Appendix A
Troubleshooting Please refer to this section for all troubleshooting information.
Appendix B
Specifications Provides technical specifications of the Mini100/Mini2 print servers.
Appendix C
Adjusting Windows95/98 Network SettingsDescribes how to install NetBEUI and TCP/IP
protocols to a Windows95/98 PC.
Chapter 5
Configuring Your Printer
Describes how to set up your printer for each network OS/ platform. Select a section that is
appropriate for your OS/ computer environment.
Chapter 6
Deleting the Supplied Utilities
Provides a step-by-step procedure to uninstall the supplied utilities.
To Next Page
Loading...