Section 3. Installing the PX-760SA Internal SATA Drive
40 PX-760 Installation and Users Manual
What Else Is In the PX-760SA Box
What you find in your Plextor box depends on what the company that
sold you the box put in—or took out—while the Plextor drive was in
their possession. Plextor currently sells the PX-760SA drive in this
configuration:
• PX-760SA DVD±R DL, DVD±R/RW and CD-R/RW drive
• Replacement front bezel (beige) and disc tray front panel
• 7-pin SATA interface cable
• 4-pin-to-15-pin SATA power cable adapter
• 1 piece of approved DVD+R media
• 4 mounting screws
• Spare jumper
• Emergency eject tool
• Plextor software disc with bundled PlexTools® Professional. Also
contains Roxio Easy Media Creator 7 Basic DVD Edition and a PDF
of the PX-760 Installation and Users Manual.
• PX-760 Quick Installation Guide
Save Your Box!
Be sure to save the box after you have installed your drive. The box
and its packaging material were designed and drop tested to ensure
your drive can endure rough treatment and still arrive in working
order. If you have to ship your drive back to Plextor, you’ll want to
send it in the original box. (For more details about returning your
drive to Plextor, see page 91.)
If the security sticker on top of your box is cut, there may be a good
reason: for example, a dealer may have added other components or
software. Carefully check the contents to ensure nothing has been
removed. If something is missing, contact the party from whom you
purchased the box for an explanation.
NOTE: This applies to the Plextor retail box. Your drive may have been
shipped in a different box with other contents, depending on whom you
purchased the drive from and what they included inside the box.
To Next Page
Loading...
