Appendix A: PX-760 Specifications
PX-760 Installation and Users Manual 87
Specifications for the PX-760SA Internal
SATA Drive
Minimum System Requirements—PX-760SA Internal SATA Drive
Computer Pentium 4, 1.4-GHz CPU or equivalent
NOTE: For real-time MPEG-2 capture and burning,
Roxio Easy Media Creator 7 requires a 1.6-GHz
Pentium 4 or equivalent.
Minimum RAM 256 MB
Hard Disk Size 1 GB of free space to write to a CD in image mode, or
10 GB of free space to create DVD images. (For more
accurate guidelines, see the help files or
documentation for the recording software you’re
using.)
Interface Serial ATA 1.0. Must support ATAPI command set.
Operating
System
Windows XP, XP 64-bit, or 2000
Rear Panel, PX-760SA Internal SATA Drive
Power Supply DC +12V,
±10%
DC +5V,
±5%
Typical standby current 100 mA 380 mA
Typical DVD read
current (DVD 16X)
1.4 A 900 mA
Typical CD read current
(CD 48X)
1.4 A 900 mA
Typical DVD write
current (DVD+R 18X)
1.2 A 1.0 A
Typical write current
(CD-R 48X)
1.2 A 1.0 A
Typical pause current 700 mA 650 mA
Peak current 2.4 A 1.7 A
To Next Page
Loading...
