Once you have completed the setup of ADS, all users and groups on your server can
be seen on your PleXtor StorX NAS.
Note: In ADS mode, Users & Groups cannot be created or modified via your PleXtor StorX
Adding /modifying users and groups must be carried out on the server.
When you add /remove users or groups on your server, you can update that
information to your PleXtor StorX immediately by selecting “ADS Sync”
Note: Resetting your PleXtor StoreX NAS to Factory Default, will reset the ADS function to
OFF (default setting). In this case, you must reset ADS as above.
39 of 46
To Next Page
Loading...
