Connecting your Plextor StorX to your Network
Copy the Plextor StorX Net-Tool software (supplied on CD) onto your PC
(select Plextor StorX Net-Tool, right click, copy, then paste to your PC)
Connecting Plextor StorX to a DHCP Router, Hub/Switch
When you connect your Plextor StorX to a Dynamic Host Configuration Protocol
(DHCP) device, the device assigns your Plextor StorX with a unique IP address.
You can confirm network connection and view IP address via the Plextor StorX NET-
Tool
• Open the Plextor StorX Net Tool
• If no device is shown click Refresh
• Click on PlexStorXxxxx
Your Plextor StorX details will be shown
9 of 46
Go to page 11 of this user manual
To Next Page
Loading...
