Firmware Upgrade
Whenever a new firmware is released, you can upgrade your Plextor StorX
firmware from here. This will take about 1~2 min for the upgrade to
complete.
Save Config
Once you have setup / configured your Plextor StorX the way you like it, Save
Config allows you to save this configuration to your PC so you can restore
these settings at a later date (Including the settings in LAN, System and
Scheduling). You might want to create a folder on your PC to store the Config
files.
Windows explorer firewall security setting might ask for
confirmation to download file onto PC.
Download: When you select save, the configuration file will be downloaded
to PC.
44 of 46
To Next Page
Loading...
