22 Change record
V1.1 – change of Fig. 33 and Fig. 34.V1.2 – change of Fig. 16 Diagram with two additional
mixer circuits upon connection of additional Module B, where: 1 – boiler, 2 – ecoMAXX regulator –
module A, 3 – ecoMAXX regulator – control panel, 4 – fan, 5 – feeder temperature sensor, 6 - gear-motor, 7
– boiler temperature sensor, 8 – HUW temperature sensor, 9 - mixer 1 temperature sensor, 10 –
temperature (weather) sensor, 11 – boiler pump, 12 – HUW circuit pump, 13 – mixer 1 circuit pump 14 –
mixer 1 servo, 15 – HUW container, 16 – room thermostat or ecoSTER200, 17 – extension module B, 18 –
mixer 2 servo 19 – mixer 3 servo, 20 – mixer 2 pump, 21 – mixer 3 pump 22 – mixer 2 room thermostat,
23 – mixer 3 room thermostat, 24 – mixer 2 temperature sensor, 25 – mixer 3 temperature sensor, 26 –
autonomous thermostat to protect underfloor heating - max. temp. 55 C (it cuts off power supply to the
mixer pump once the maximum temperature has been exceeded; thermostat is not included in the regulator
supply), 27 – return temperature sensor (recommended mounting location: bottom section of boiler water
jacket), 28 – thermostatic 3-way valve (to protect boiler return), 29- throttle mushroom valve, 32 – HUW
circulating pump, P – electric relay, 38 – hydraulic coupling, 39 – room temperature sensor CT7.
RECOMMENDED SETTINGS: