6
2 General information
Boiler regulator ecoMAX 800 model P1,
version L, is a modern electronic device
intended to control pellet boiler operation.
The regulator is a multipurpose device:
it automatically maintains a preset boiler
temperature by controlling the fuel
combustion process,
it controls timing of feeding screw and
fan,
it automatically stabilizes a preset
temperature of the domestic hot water
tank,
it automatically maintains preset
temperature of several independent
mixer heating cycles.
The preset temperature of heating cycles and
boiler can be set on the basis of a weather
sensor readouts. The regulator features an
Individual Fuzzy Logic function. It allows to
optimize the combustion process, which is in
favour of natural preservation, decreases fuel
consumption and relieves the user of the
necessity of adjusting the burner
parameters.
Possibility of cooperation with room
thermostats, separate for each heating
cycles, facilitates maintaining comfortable
temperature in the heated rooms. Moreover,
if need arises, the device enables a reserve
boiler (gas- or oil-fired). The device has
modular construction, consisting of control
panel, main boiler control module (A), and
module controlling mixer cycles and HUW
(B). The device is operated in an easy and
intuitive way. Regulator can cooperate with
an additional control panel situated in living
quarters. It can be used in a household and
similar facilities, as well as in light
industrialized facilities.
3 Information about documentation
The regulator manual is a supplement for the
boiler manual. In particular, except for this
manual, the boiler manual should also be
observed.
The regulator manual is divided into two
parts: for user and fitter. Yet, both parts
contain important information, significant for
safety issues, hence the user should read
both parts of the manual.
We are not responsible for any damages
caused by failure to observe these
instructions.
4 Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it was
available at any time. In the case of removal
or sale of the device, the attached
documentation should be handed over to the
new user / owner.
5 Applied symbols
In this manual the following graphic symbols
are used:
- useful information and tips,
- important information, failure to
observe these can cause damage of
property, threat for human and
household animal health and life.
Caution: the symbols indicate important
information, in order to make the manual
more lucid. Yet, this does not exempt the
user from the obligation to comply with
requirements which are not marked with a
graphic symbol.
6 Directive WEEE 2002/96/EG
Act on electrical and electronic
equipment
Recycle the product and the
packaging at the end of the
operational use period in an
appropriate manner.
Do not dispose of the product
together with normal waste.
Do not burn the product.
To Next Page
Loading...
Need help?
General
