PH/PHX-2 Manual
17
INSTALLATION
WARNING! Use suitable protection and follow the recommendations in the
Safety Information enclosed and provided by material suppliers when installing
or working with the Proportioner.
Inside the console is a Terminal Strip for connecting the
incoming power cable (not supplied). The electrical connection
of the Proportioner must be performed by a qualified electrician.
NOTE! To ensure the PH Series Proportioner works correctly, the electrical
supply must meet the specifications indicated on the Serial Number Placard
affixed to the Electrical Console.
CAUTION! Make sure the power cable is disconnected from the main power
source before connecting to the Terminal Strip in the Console.
To Next Page
Loading...
