PH/PHX-2 Manual
6
SAFETY AND HANDLING
This chapter contains important information on the safety, handling, and use of your PH
Series Proportioner.
Before installing the PH Series Proportioner and start-up,
carefully read all the technical and safety documentation
included in this manual. Pay special attention to the
information to know and understand the operation and the
conditions of use of the PH Series Proportioner. All of the
information is aimed at enhancing User Safety and
avoiding possible breakdowns derived from the incorrect
use of the PH Series Proportioner.
WARNING! Symbol is presented in front of information to alert of a
situation that might cause serious injuries if the instructions are not
followed.
CAUTION! Symbol is presented in front of information that indicates how to
avoid damage to the Proportioner or how to avoid a situation that could
cause minor injuries.
NOTE! Symbol is presented in front of relevant information of a procedure
being carried out.
Careful study of this manual will enable the operator to know the characteristics of the
PH Series Proportioner and the operating procedures. By following the instructions and
recommendations contained herein, you will reduce the potential risk of accidents in the
installation, use, and maintenance of the PH Series Proportioner. You will provide a
better opportunity for greater output, incident-free operation for a longer time, and the
possibility of detecting and resolving problems quickly and simply.
Keep this Operations Manual for future consultation of useful information at all times. If
you lose this manual, ask for a new copy from your PMC Service Center or go on line at
our web site (www.polymac-usa.com).
To Next Page
Loading...
