PMI SVM-10 - User Manual

42 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SVM-10 Manual

Stray Voltage Monitor Scanner

User’s Manual

Power Monitors Inc. 1-800-296-4120

1661 Virginia Avenue 540-434-4120

Harrisonburg, VA 22802 USA Fax: 540-432-9430

http://www.powermonitors.com

Table of Contents

Questions and Answers

F
frossAug 11, 2025
How to fix a PMI SVM-10 that will not communicate?
- H
  hensleyjessicaAug 12, 2025
  To resolve communication issues with your PMI Scanner, first, ensure that the Local and Modem ports are assigned to different COM port numbers and that Palm Pilot HotSync Manager is disabled. Also, verify that the serial port and cables are correctly configured. Try different baud rates. Additionally, disable power management or power-saving settings in both the Windows control panel and the BIOS, then retry.
A
Amy ThomasAug 19, 2025
What to do if my PMI SVM-10 will not download data?
- S
  skinnerkaitlynAug 19, 2025
  If your PMI Scanner is not downloading data, try different baud rates. Open the Task Manager in Windows and end task for all programs except WinScan™, Systray, and Explorer, and then retry the download.
L
Laura SanfordAug 27, 2025
Why is my PMI SVM-10 partially working and showing erratic behavior?
- T
  Tammy SawyerAug 27, 2025
  If your PMI Scanner is partially working, not counting down, or behaving erratically, it's possible that water has entered the unit. Check that the latches and gaskets are in good, working condition.
C
Christopher ThompsonSep 3, 2025
Why does my PMI SVM-10 LCD display continuously show 'Charging Battery'?
- T
  Tina MartinezSep 3, 2025
  If the LCD display of your PMI Scanner continuously shows "Charging Battery", the scanner may be in STOP mode. Take the unit out of stop mode. If the symptom persists, contact PMI for evaluation.

PMI SVM-10 Specifications

General

Brand	PMI
Model	SVM-10
Category	Scanner
Language	English