SAFETY ISSUES
Please read carefully before installing or using the Scanner.
The Scanner contains dangerous voltage levels during operation. Do not disassemble
the Scanner. THE ONLY USER-SERVICEABLE PARTS INSIDE ARE THE
BATTERIES! Insure power is completely removed from the unit prior to changing
the batteries.
This device is manufactured for use by trained and qualified personnel only.
Do not install or operate while in contact with standing water or wet ground.
Wear protective gloves and safety glasses at all times during the installation,
operation and removal of the Scanner.
During installation, disconnect power from any lines to which the Scanner will be
attached.
Although the Scanner has been designed and built to be as safe as possible, great
care should be exercised at all times during operation and installation.
To Next Page
Loading...