PMI SVM-10 - Appendix 1: Pc and Scanner Configuration Factory Settings

SVM-10™ Manual
32
Appendix 1: PC and Scanner configuration
factory settings
PC SETUP
OPTION
FACTORY SETTING
Local: Serial Port
Com 1
Local: Baud Rate
4800
Modem: Serial Port
Com 2
Modem: Baud Rate
Auto
Dialing Method
Tone
Auto Scanner Reset
Prompt
Scale Factor: Voltage
1
Scale Factor: Current
1
Auto Clock Reset
On
Auto Data Save
On
Stripchart Report Header
Checked
SCANNER SETUP/INITIALIZE
OPTION
FACTORY SETTINGS
LED Indicator
Checked
Interval Recording Overwrite
Checked
Ab. LED Trigger Duration
5 seconds
Interval Data Storage
100 percent
Significant Change Threshold
3 volts
Modem Ring Count
3 rings
Number of Channels
4
Rotary Switch Override
Not Checked
Recording Interval
1 minute
EVENT RECORDING PARAMETERS
Nominal Voltage
120 volts
Threshold Bands
6 volts
Minimum Event Time
10 cycles
Default settings are identical for all four channels.